TheToy.org

How to charge Lelo Tiani 3

Lelo Tiani 3 is a rechargeable vibrator and charging it is super easy – just unscrew and detach the clitoral arm of the vibe, plug your USB cable into a power source (a laptop or a USB power socket). Complete charging takes about 2 hours and gives you up to 90 days standby time. You can see how I do it in the video below:

The light on your massager will pulse to indicate that it is charging. When it is fully charged (after ca. 2 hours) the light will emit a steady white glow.

Take care to screw the base attachment back on tightly, especially if you are planning to use your LELO in water. If it is not screwed tight it might not be water resistant and you can damage the toy if you submerge it or use it in the shower.

It is important to use only the charger provided by Lelo to charge your Tiani 3 remote control vibrator. If you loose or damage the charger, contact Lelo to get a replacement. You can buy it here.

When to charge the Lelo Tani 3

If the power in your vibrator is running low, the light will flash rapidly during operation. This means you should perform the steps I have described above and charge the toy. According to Lelo SenseMotion™ products will perform best when quality-brand batteries are used and the product is fully charged, boosting signal to its fullest.

Getting the batteries in the Tiani 3 remote control

The moment you remove the battery cover on your new the remote, it is clear that it has been designed with convenience in mind.

Carefully open the remote control (the battery cover on the remote should be loose when you first open your product) and you’ll find two slots for batteries just waiting to be filled. Place the batteries carefully in the right positions and your remote control will be ready to use with the vibrator!

The remote uses 2 AAA batteries (1.5V). This provides up to 10 hours of continuous use. To open the cover, place the plastic key in the cover’s slot and turn counterclockwise; do a 10-degree twist clockwise to lock shut. You’ll get your plastic key for opening/closing the battery slot in the Tiani 3 box. Once it stop working, you should replace the batteries.

Make sure you don’t use other tools (like I did because I lost my plastic key somewhere beneath the sheets) such as coins that may damage the surface of the remote.

Here is a video on how I open and close the Tiani 3 remote control to open it and close it again:

Always ensure the remote is fastened shut before using in water to clean it or in shower play.

Lelo Tiani 3 is one of the top hands-free vibrators. Here you can read my full Tiani 3 review and here is a quick guide on how to use it.

Amie Dawson PhD

Amie Dawson PhD

Amie is webmistress and head honcho at TheToy. She’s been married for seven years and has two kids.

For the past 10years Amie has lived the swinging lifestyle and gets to practice what she preaches at TheToy.

Sometimes technically challenged but always willing to try something new is the best way to describe Amie. Her motto in life is: “There is no such word as Can’t, take off the T and make it can.”